The casing is made of 5 mm thick Mild Steel Sheet reinforced with iron angles riveting. Front walls are made of 8 mm thick Mild Steel duly Hammer tone painted. Heating Chamber consisting of rectangular horizontal shape totally enclosed Muffle. Hinged type door is fitted for easy operation opens in front with the hot surface always away from the operator.
Heating Elements rating 1.5 KW are made of Kanthal wire , special high temperature alloy , are completely surrounding the heating chamber , assuring the most uniform distribution of heat and protects heating elements against damage and chemical deterioration . Highly efficient light weight insulation with Silliminate refractories and minimum 6” thick pad of fibre wool is cast permanently into the furnace body. It takes 35 min. to achieve Set Temp. from ambient temperature. Skin Temp. is 20 deg C above ambient. Heating elements are mounted on element holding bricks.
TEMPERATURE: The furnace can be operated continuously upto 950 deg C and maximum 1000 deg C. Temperature is controlled by Microprocessor based PID Digital temperature controller.
CONTROL PANEL:- The control panel at the bottom of the front consists Microprocessor based PID Digital temperature controller, two long neon lights which glows while the furnace is ‘ON’. Muffle is fitted with Thermocouple, Silver Thermal Fuse, main lead with power plug to work on 220/230 Volts AC supply.
The casing is made of 5 mm thick Mild Steel Sheet reinforced with iron angles riveting. Front walls is made of 8 mm thick Mild Steel duly Aluminium painted. Screw joints and welding wherever necessary and painted with Aluminium Paint. Heating Chamber consisting of rectangular horizontal shape totally enclosed Muffle Bracket at 1200 deg C. Hinged type door is counter balanced for easy operation opens in front with the hot surface always away from the operator.
Heating Elements rating 3.5 KW are made of Kanthal wire , special high temperature alloy , are completely surrounding the heating chamber , assuring the most uniform distribution of heat and protects heating elements against damage and chemical deterioration .
Highly efficient light weight insulation with Silliminate refractories and minimum 6” thick pad of fibre wool is cast permanently into the furnace body. It takes 35 min. to achieve Set Temp. from ambient temperature . Skin Temp. is 20 deg C above ambient. Heating elements are mounted on element holding bricks.
TEMPERATURE: The furnace can be operated continuously upto 1150 deg C and maximum 1200 deg C. Temperature is controlled by Microprocessor based PID Digital temperature controller
This furnace is used for Heat Treatment of Alloy-Steels. This furnace shall have following features:
We Strictly Follow the privacy policy as follows:- We don’t ask you for personal information unless we truly need it. We believe the importance of Privacy Policy. (We can’t stand services that ask you for things like your gender or income level for no apparent reason.) We don’t share your personal information with anyone except to comply with the law, develop our products, or protect our rights. We don’t store personal information on our servers unless required for the on-going operation of one of our services.
We Strictly Follow the disclaimer policy as follows:- All views expressed on this site are my own and do not represent the opinions of any entity whatsoever with which I have been, am now, or will be affiliated.
Khera© 2024 All Rights Reserved
