LABORATORY CENTRIFUGE [MODEL NO. KI- 199 (C)]
General purpose bench top laboratory centrifuge machine.
Heavy duty CRC construction finished with powder coating.
Double walled ABS injection moulded lid which is light weight to avoid accident.
Inter lid lock and metallic centrifuge bowl for safety.
2 lines of 16 character LCD display of RPM, RCF, set time and run time.
Microprocessor based programmable speed control from 500 to 5200 RPM depending upon the type of rotor and digital timer (0-59 minutes).
Last test parameter recall and display automatically on LCD.
Low noise, smooth and soft start and stable speed output.
Wide variety of rotors and reduction adopters available on demand at extra cost.
The lid is light in weight to avoid accident due to heavy weight metallic lids during operations.
Very stable and low noise
No vibrations
Motor fitted on anti vibration spring pads. Supported with rubber covering from inside and outside.
Technical Parameter
Maximum Speed |
5250 RPM |
Maximum RCF ‘g’ |
3600 |
Maximum Capacity |
400 ml |
Motor |
Universal Motor (fitted with carbon brushes) |
Power |
AC 220V 50Hz ±10% |
Dimensions of Machine |
L=415mm, W=360mm, H=305mm |
Dimensions of outer box |
510 x 510 x 390 mm |
Nett weight |
21 kg. Approx. Gross weight with box= 23.5 kg. |
Head Type |
Rotor Capacity |
Speed (RPM) |
Max. RCF ‘g’ |
Angle Heads |
6 x 50 ml |
5250 |
3600 |
Angle Heads |
4 x 50 ml |
5250 |
3600 |
Angle Heads |
4 x 100 ml |
4000 |
2850 |
Angle Heads |
24 x 15 ml |
4000 |
2850 |
LABORATORY TABLE DELUXE CENTRIFUGE [MODEL NO. KI- 199 (D)]
General purpose bench top laboratory centrifuge machine.
Heavy duty CRC construction finished with powder coating.
Double walled ABS injection moulded lid which is light weight to avoid accident.
Inter lid lock and metallic centrifuge bowl for safety.
4 lines of 20 character LCD display for set time, run time, set and run RPM, RCF.
Microprocessor based programmable speed control from 500 to 5200 RPM depending upon the type of rotor and digital timer (0-59 minutes)
Last test parameter recall and display automatically on LCD.
50 programmes can be stored in memory and automatic rotor identification on displays.
Additional electronic lid lock which does not allow to open lid when machine is running and opens automatically after centrifuge time is over. Calibration window on lid.
Dynamic brake (automatic) and imbalance detector are provided.
Selection of 3 acceleration + 4 deceleration profile with fast spin option.
Technical Parameter
Maximum Speed |
5250 RPM |
Max. RCF ‘g’ |
3600 |
Maximum Capacity |
400 ml |
Motor |
Universal Motor (1/8 H.P.) (fitted with carbon brushes) |
Power |
AC 220V 50Hz ±10% |
Dimensions of Machine |
L=415mm, W=360mm, H=305mm |
Dimensions of outer box |
510 x 390 mm |
Nett weight |
21 kg. Approx. Gross weight with box= 23.5 kg. |
Head Type |
Rotor Capacity |
Speed (RPM) |
Max. RCF ‘g’ |
Angle Heads |
6 x 50 ml |
5250 |
3600 |
Angle Heads |
4 x 50 ml |
5250 |
3600 |
Angle Heads |
4 x 100 ml |
4000 |
2850 |
Angle Heads |
24 x 15 ml |
4000 |
2850 |
CENTRIFUGE MULTIPURPOSE BRUSHLESS [MODEL NO. KI- 199 (E)]
Heavy duty C.R.C. construction finished with powder coating.
Fitted with brushless Automatic balanced motor.
Microprocessor based 4 lines, 20 characters. LCD display for set time, run time, set and run rpm, rcf.
Equipped with 0-99 minute timer.
Programmable speed regulator to control speed from 500 to 6000 RPM depending upon the type of rotor & fast spin option.
50 Programmes can be stored in memory.
Automatic rotor identification on display.
Additional electronic lid lock which does not allow to open lid when machine is running.
Dynamic brake (automatic) and imbalance detector are provided.
Selection of 3 acceleration + 4 deceleration profile.
Maximum Speed |
6000 RPM |
Max. RCF |
4390xg |
Motor |
Brushless Motor |
Noise |
(<=)65dB |
Power |
AC 220V 50Hz 15A |
Weight |
29 Kg. |
Dimension |
L-490 x W-380 x H-270 mm. |
Rotors & Heads
Rotor Type |
Rotor Capacity |
Speed on Rotor |
RCF on Rotor |
Angle Heads |
24 x 15 ml |
4000 RPM |
2670xg |
Angle Heads |
24 Vacuutainers |
6000 RPM |
4140xg |
Angle Heads |
32 tubes of 12x75mm |
6000 RPM |
4140xg |
Angle Heads |
32 tubes of 12x100mm |
6000 RPM |
4140xg |
Angle bucket rotor |
4 x 100 ml |
5000 RPM |
3450xg |
Angle bucket rotor |
4 x 50 ml |
6000 RPM |
4390xg |
Swing out rotor |
16 x 15 ml |
5200 RPM |
3588xg |
Swing out rotor |
12 x 15 ml |
5200 RPM |
3588xg |
RESEARCH CENTRIFUGE [MODEL NO. KI- 199 (F)]
Bench Top High Speed Centrifuge Machine.
Microprocessor based with digital timer 0-59 minutes.
Heavy duty CRC Construction finished with powder coating.
Metallic centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced universal motor (with carbons).
2 lines of 16 character LCD displays of RPM, Set time and run time.
Programmable speed controller from 2000 to 10000 in variation of 100 RPM.
Last test parameter recall and displays automatically on LCD.
Lid lock for safe drive.
Rotors made of Aluminium Alloy to withstand high speed of 10000 RPM.
Maximum Speed |
10000 RPM |
Motor |
Universal Motor (with carbon) |
Power |
AC 220V 50Hz ±10% |
Dimensions of Machine |
510 x 510 x 390 mm |
Weight of Machine |
21 kg. Approx |
Dimension & weight with box |
23.5 kg |
Machine comes with only one rotor which can be selected form below mentioned table:
Head Type |
Rotor Capacity |
Max. Speed on Rotor (RPM) |
Angle Head |
12 x 1.5/2 ml |
10000 |
Angle Head |
24 x 1.5/2 ml |
10000 |
Angle Head |
8 x 5 ml |
10000 |
Angle Head |
8 x 15 ml |
10000 |
Angle Head |
4 x 25 ml |
10000 |
Angle Head |
4 x 50 ml |
10000 |
HIGH SPEED RESEARCH CENTRIFUGE [MODEL NO. KI- 199 (I)]
High speed high capacity bench top, laboratory centrifuge machine, microprocessor based.
Heavy duty C.R.C. construction finished with powder coating.
Stainless steel centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced brushless motor with electronic drive. Digital timer 0-99 minutes.
4 lines 20 characters LCD display for set time, run time. Set & run rpm, rcf and rotor identification.
Programmable speed regulator from 2000 to 20000 rpm in interval of 100 rpm
50 programmes can be stored in memory and automatic rotor identification on display.
Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
Dynamic brake (automatic) and imbalance detector are provided.
Fast spin option.
Selection of 3 acceleration + 4 deceleration profile.
Programmable speed regulator from 2000 to 20000 in interval of 100 RPM.
Last test parameter recall land displays automatically on LCD.
Supply completed with instruction manual, cord & plug to work on 220 volts 50 Hz AC.
Machine comes without rotor heads.
Maximum Speed |
20000 RPM/min |
Maximum RCF ‘g’ |
27800xg |
Maximum Tube size |
100 ml |
Maximum Capacity |
400 ml |
WxDxH |
400 x 500 x 455 mm |
Rotor Capacity |
Type of Rotor |
Type of |
Speed (RPM) Container |
RCF ‘g’ |
12 x 1.5/2 ml |
Angular |
Plastic |
20000 |
27800 |
12 x 1.5 ml |
Angular |
Plastic |
16000 |
22240 |
12 x 15 ml |
Angular |
Plastic |
16000 |
22240 |
8 x 25 ml |
Angular |
Plastic |
16000 |
22240 |
6 x 50 ml |
Angular |
Plastic |
16000 |
22240 |
4 x 100 ml |
Angle Heads |
Plastic |
14500 |
20155 |
HIGH SPEED REFRIGERATED CENTRIFUGE [MODEL NO. KI- 199 (J)]
Bench Top refrigerated centrifuge machine, all purpose.
Heavy duty C.R.C. construction finished with powder coating.
Stainless steel centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced brushless motor with electronic drive.
4 lines, 20 characters. LCD display for set time, run time, set and run rpm, rcf.
Digital timer 0-99 minutes, lid lock and fast spin option and rotor identification.
Dynamic brake (automatic) and imbalance detector are provided.
Selection of 3 acceleration + 4 deceleration profile.
Microprocessor based. Programmable speed regulator from 2000 to 20000 in interval of 100 rpm.
Last test parameter recall and displays automatically on LCD.
PID Electronic digital temperature controller cum indicator is fitted to control the centrifuge temperature from room temperature upto -20ºC.
Supply completed with instruction manual, cord & plug to work on 220 volts 50Hz AC.
Technical Parameter
Maximum Speed |
20000 RPM/min |
Maximum RCF ‘g’ |
27800xg |
Timer |
0-99 min. |
Motor |
Brushless Motor |
Temp. Range |
From room temperature to -8ºC |
Temp. Accuracy |
±2ºC |
Power |
AC 220V 50Hz 20A |
Weight |
60 Kg. Approx. |
Dimension |
L-27” x W-21” x H-15” approx. |
Rotor Type |
Rotor Capacity |
Speed On Rotor |
RCF On Rotor |
Angle Rotor |
12 x 0.5 ml |
20000 RPM |
27800xg |
Angle Rotor |
12 x 1.5/ 2.2 ml |
20000 RPM |
27800xg |
Angle Rotor |
24 x 1.5/2.2 ml |
16000 RPM |
17000xg |
Angle Rotor |
10 x 15 ml |
13000 RPM |
17000xg |
Angle Rotor |
12 x 10 ml |
13000 RPM |
17000xg |
Angle Rotor |
6 x 50 ml |
13000 RPM |
17000xg |
Angle Rotor |
4 x 50 ml |
13000 RPM |
17000xg |
Angle Rotor |
4 x 100 ml |
13000 RPM |
17000xg |
MICROSPIN CENTRIFUGE [MODEL NO. KI- 199 (K)]
High speed Micro Centrifuge R.P.M 16000 and RCF 16600.
Heavy duty plastic injection moulded body.
Stainless Steel protection bowl.
Fitted with well balance universal motor having long life with imported carbons.
2 lines of 16 character LCD display of RPM., RCF, timer 0-59 minutes display of set and run time.
Digital timer which can be set from 0-99 minutes in interval of 1 minute.
Programmable speed regulator from 2000 to 16000 in variation of 100 RPM.
Last test parameter recall and displays automatically on LCD.
Microprocessor based
Motor remain cool even after running full time.
Motor fitted on anti vibration springs supported with rubber covering from inside and outside.
Low sound, very stable.
Supply completed with following accessories:
Rotor Head to accommodate 12 eppendorf/Micro centrifuge tubes with cover of 1.5 ml.2ml (12x1.5/2ml)
Reduction adopters for 0.2/0.5 ml eppendorf (Micro Centrifuge tubes).
Head puller, spanner, Inst. Manual, cord & plug to work on 220 volts 50 Hz AC.
Dimension of Machine |
L=290 mm, W=270 mm, H=240 mm |
Weight of Machine |
9.5 kg approx. |
Dimension of Box |
L- 355 mm x W-355 x H-340 mm |
Weight of Box |
11 kg approx. |
MICRO CENTRIFUGE BRUSHLESS [MODEL NO. KI- 199 (K) BL]
High speed, bench top, Micro Centrifuge Machine, Microprocessor based.
Heavy duty CRC construction finished with powder coating.
Stainless Steel centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced brushless motor with electronic drive.
4 lines of 20 character LCD display for set time, run time, set and run RPM, RCF and rotor identification. Timer is 0-59 minutes.
50 Programmes can be stored in memory and automatic rotor identification on display.
Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
Dynamic brake (automatic) and imbalance detector are provided.
Selection of 3 acceleration + 4 deceleration profile.
Programmable speed regulator from 2000 to 20000 in interval of 100 RPM.
Last test parameter recall and displays automatically on LCD.
Fast spin option and work on 220 volts 50 Hz A.C.
Machine comes without rotor heads.
Special Features
Rotor Head are manufactured from special grade aluminium which can withstand high speed.
Very stable
No vibrations
Motor fitted on anti vibration springs supported with rubber covering from inside and outside.
Capacity |
Type of Motor |
Type of Container |
Speed (RPM) |
RCF ‘g’ |
12x1.5/2ml |
Angular |
Plastic |
20000 |
27000xg |
24x1.5/2ml |
Angular |
Plastic |
16000 |
16800xg |
8x5 ml |
Angular |
Plastic |
16000 |
16800xg |
REFRIGERATED MICRO CENTRIFUGE BRUSHLESS [MODEL NO. KI- 199 (L)]
Bench Top refrigerated centrifuge machine.
Heavy duty C.R.C. construction finished with powder coating.
Stainless steel centrifugal bowl for extra protection and easy cleaning.
Fitted with well balanced universal motor with having carbon brushes.
2 lines, 20 characters. LCD display for set time, run time, set and run rpm, rcf.
Digital timer 0-99 minutes.
Programmable speed regulator from 2000 to 16000 in variation of 100 rpm.
Safety lid lock.
PID Electronic digital temperature controller cum indicator is fitted to control the temperature of centrifuge bowl from room temperature upto -20ºC and shuts off the cooling compressor within accuracy of ±1ºC in standby mode. Means only the centrifuge bowl is cooling and centrifuge motor is in standby mode.
Temperature accuracy when motor is also running is ± 2ºC.
Low sound.
Fitted with vacuum legs for better griping on table.
Vibration free.
CFC Free refrigeration.
Kirloskar Compressor.
Technical Parameter
Max. Speed |
16000 RPM |
Max. RCF |
16800xg |
Timer |
0-59 min. |
Motor |
Universal Motor (with carbon brushes) |
Temp. Range |
From room temperature to -20ºC |
Power |
AC 220V 50Hz 20A |
Weight |
55 Kg. Approx. |
Dimension |
L-25” x W-20” x H-14” approx. |
Rotors & Heads
Rotor Type |
Rotor Capacity |
Speed on Rotor |
RCF on Rotor |
Angle Rotor |
12 x 1.5/ 2.2 ml |
16000 RPM |
16800xg |
Adopters to accept 1.5 ml Eppendrof micro-centrifuge tubes. |