Hospital Furnitures

STRETCHER TROLLEY [MODEL NO. KH- 124]

  • Overall Approx. Size: 213L× 56W× 81H cms.
  • Frame work made of 1.25”× 16G vertical and 1”× 18G horizontal CRC Tube.
  • Trolley mounted on 15 cm dia castors 2 with brakes.
  • Removable stretcher top made of MS Sheet.
  • Pushing handle at both end of the stretcher top.
  • Finish: Pre-treated and Epoxy powder coated.
  • Also available in complete SS.

  • PATIENT TROLLEY WITH FIXED CUSHIONED 2 SECTION TOP [MODEL NO. KH- 125]

  • Overall Approx. Size: 210L× 56W× 81H cms.
  • Frame work made of Tubular MS Pipe.
  • Swing away type safety side railing.
  • Adjustable IV Rod.
  • Two section foam padded top.
  • Backrest adjustable.
  • Trolley mounted on 15 cms dia castors two with brakes.
  • Epoxy powder coated finish.

  • STRETCHER ON TROLLEY WITH MATTRESS [MODEL NO. KH-126]

  • Overall Approx. Size: 210L× 56W× 81H cms.
  • Frame work made of Tubular MS Pipe.
  • Swing away type safety side railing.
  • Adjustable IV Rod, Utility Tray, Cylinder Cage.
  • Foam padded top.
  • Trolley mounted on 15 cms dia castors two with brakes.
  • Epoxy powder coated finish.

  • BED SIDE LOCKER (DELUXE) [MODEL NO. KH-153]

  • 16”L× 16”W× 32”H
  • CRCA Sheet constructions having one box and one drawer.
  • Jointless SS top with three sides raise edges.
  • Epoxy powder coated.








  • BED SIDE LOCKER (STD.) [MODEL NO. KH-154]

  • 16”L× 16”W× 32”H
  • Four MS legs fitted with PVC Stumps.
  • Box and door made of MS Sheet.
  • Top made by machine pressed jointless SS Sheet.
  • Finish: Epoxy Powder coated.










  • OVER BED TABLE [MODEL No. KH-156]

  • 42”L× 18”W× 39”H
  • Tubular frame work mounted on 5cms castors.
  • Fixed ABS mounted top 33”×18”
  • Pre-treated and Epoxy powder coated.
  • Also available in laminated top
  • Note: also available in Stainless Steel Model





  • OVER BED TABLE (MANUALLY ADJUSTABLE)[MODEL NO. KH-157]

  • Rectangular frame work mounted on 5 cms castors.
  • 33”× 18” ABS moulded top adjustable by side knob.
  • Pre-treated and Epoxy powder coated.
  • Also available in laminated top
  • Note: also available in Stainless Steel Model




  • OVER BED TABLE (ADJUSTABLE) [MODEL NO. KH-158]

  • ABS moulded top 33”× 18” fitted on MS square tubular telescopic steam
  • Height adjustable from approx 750×1100 mm by gear handle
  • Base frame made of rectangular MS tube mounted on 50mm dia castors.
  • Finish Epoxy Powder coated.
  • Also available in laminated top.
  • Note: also available in Stainless Steel Model



  • WASH BASIN STAND (A-SINGLE/B-DOUBLE)[MODEL NO. KH-161]

  • Five legs base mounted on 5 cms dia castors.
  • With one approx 35 cms dia SS Basins.
  • Vertical MS tube made of 25 mm× 15G.
  • Basin holder MS tube made of 16mm× 18G.
  • Pre-treated and epoxy powder coated.
  • Also available in SS Vertical tube and SS basin holder.


  • BED SIDE SCREEN (4 PANELS) [MODEL NO. KH-162]

  • Overall approx size: 1680H× 2450 mm
  • MS tubular construction made of 19mm× 18G in four section.
  • Legs made of 25 mm× 18G fitted with 50 mm dia castors.
  • Supplied with hooks and spring with curtains cloth.
  • Finish: Pre treated with Epoxy Powder coated.



  • SALINE STAND [MODEL NO. KH-168]

  • 5 pronged base fitted with 5 cms dia castors.
  • 12 mm SS Adjustable double hook I.V Rod.
  • To hold IV Rod at one fixed height by knob.
  • A- Plastic base with MS/SS Pipe.
  • B- SS Base with SS pipe.
  • C- MS base with MS pipe.





  • INSTRUMENT TROLLEY (TWO SHELVES)[MODEL NO. KH-172]

  • Frame work made of 1”× 18G Vertical MS Tube.
  • Two 22G SS Shelves with three side railing.
  • The trolley mounted on 100 mm dia castors.
  • Finish: Pre-treated Epoxy powder coated.
    • (A) 18”× 24”× 32”
      (B) 30”× 18”× 32”
      (C) 36”× 22”× 32”
  • Also available in SS frame and SS Shelves.





  • DRESSING TROLLEY [MODEL NO. KH-173]

  • Approx Size: 30”× 18”× 32”
  • Frame work made of MS tubes
  • Two SS Shelves over with SS railing on all four sides.
  • The trolley fitted SS Bucket and SS Bowl.
  • The trolley mounted on 100 mm dia castors.
  • Finish: Pre-treated Epoxy powder coated.
  • Also available in SS frame work and SS Shelves.





  • REVOLVING STOOL (SS TOP) [MODEL NO. KH-180]

  • Four leg base with PVC Stumps.
  • Height adjustment by machine screw from 18”×27”.
  • A foot rest ring support made of MS tube.
  • SS top supported with MS sheet top.
  • Finish: Pre-treated and epoxy powder coated.
  • Also available in SS frame work and SS top.





  • REVOLVING STOOL (CUSHIONED TOP) [MODEL NO. KH-181]

  • Four leg base with PVC Stumps.
  • Height adjustment by machine screw from 18”×27”.
  • A foot rest ring support made of MS tube.
  • Cushioned top supported with MS circle.
  • Finish: Pre-treated and epoxy powder coated.
  • Also available in SS frame work and SS top.






  • FOOT STEP SINGLE [MODEL NO. KH-187]

  • (18”× 9”× 9”)
  • MS Tubular legs fitted with PVC Stumps.
  • Pre treated and Epoxy powder coated.
  • MS top fixed with rubber matting and aluminum beedings.
  • Also available in Stainless Steel Model.



  • FOOT STEP DOUBLE [MODEL NO. KH-188]

  • (18”× 18”× 18”)
  • MS tubular frame fitted with PVC stump.
  • CRC Sheet duly double press bent.
  • Pre-treated and epoxy powder coated.
  • Also available in Stainless Steel model.
  • Book Your Order Today With Us